Given the relatively low cost printers, such devices can already be considered a necessary component of a home computer. In light of this it is understandable interest of many to how to fill the print cartridge. In this paper we will deal in detail with this question in relation to jet models, the printing liquid ink. Also, in general terms, describe how to fill the cartridge of the laser printer. This injustice is justified: Inkjet models are cheaper than laser and, most importantly, allow you to print in color. The cost of color laser printers even scares the person with average incomes.
Before we consider how to fill inkjet cartridge, let us remember the internal structure of these models: the nozzle print head, controlled by a controller in accordance with the commands from the computer, one way or another to give micro particles of liquid paint the desired color paper. Paint itself is in the tank - and eventually spent cartridges. New cartridges are expensive, but there is a solution - to learn how to fill the cartridge yourself.
You will need:
- Workstation (desk), the laid a thick layer of newspaper, cardboard, film - everything that will prevent accidentally spilled paint cause explanation of the relationship with relatives.
- Several pieces of pure wool. It is necessary to remove the cartridge from the possible drips.
- Cheap polyethylene gloves (these women dye their hair). Proper skill is no longer such a need, but for beginners those who do not want to walk with hands soiled with paint, better protect them.
- Several disposable syringes of 5 ml - for each color on the syringe. Incidentally, the number of colors varies from model to model, but always at least four (black, red, blue, and yellow). They can be found in the instructions.
- Banks with a paint. There should be appropriate for this model, and be of the required type (pigment, water-soluble).
So, how to fill the cartridge? Turn on the printer and open the cover (see the instructions on replacing cartridge HP C6180 ink), as a result of the carriage extends to the seat, allowing to remove the cartridges. We take out the right and look at the top cover of a small hole. There is some need less. Often it hides under the sticker. Type in the desired color ink syringe, slowly introduce a thin needle. Between the needle and the walls must be a distance to the passage of air. Inside the cartridge is an absorbent material, so the needle should feel resistance when introduced. To the bottom of the cartridge leave at least 1 cm. Then everyone will understand how to fill the cartridge. Squeeze ink slowly. Usually it is sufficient 1.5-2.5 "cube" (depending on the tonnage capacity and ink residues). It remains to bring them back into the printer. You may need the tools, gimlet drill and BF-1284 Printer Cable.
A few rules:
- For a toner cartridge that combines multiple ink tank, be sure to find on the Internet matching holes. Otherwise, you can mix up the color and it will be necessary to wash the cartridge.
- Ideally you should rinse the tank with a special liquid, so that the mixing of different colors is not recommended. It is strictly prohibited without washing poured into the cartridge, which are water-soluble ink, the pigment of the type (and vice versa).
http://www.bizbilla.com/
http://blog.bizbilla.com/
No comments:
Post a Comment